Aluminum foil faced ceramic fiber heat shield mat for wires, hoses and panels near exhaust, headers, turbos and engine heat. Choose 78mil or 158mil self-adhesive, or 190-195mil (5mm) non-adhesive, in 33 sizes.
Material
- Core: ceramic fiber, lightweight with low heat conductance
- Face: aluminum foil that reflects radiant heat
- Backing: self-adhesive (78mil and 158mil) or no adhesive (190-195mil)
Temperature
- The ceramic fiber layer is rated by the manufacturer for continuous heat up to 2,300°F.
- The self-adhesive backing is rated for continuous exposure up to 230°F (110°C). Keep the adhesive side away from the heat source.
Sizes
- 78mil (2mm) Self-Adhesive: 11.8" x 28", 11.8" x 35", 11.8" x 80", 15" x 24", 24" x 30", 24" x 58", 24" x 60", 24" x 90", 24" x 120", 28" x 35", 35" x 60", 35" x 80", 35" x 90", 35" x 180"
- 158mil (4mm) Self-Adhesive: 18" x 24", 22" x 24", 24" x 60", 24" x 80", 24" x 100"
- 190-195mil (5mm) Non-Adhesive: 15" x 24", 24" x 28", 24" x 36", 24" x 48", 24" x 50", 24" x 58", 24" x 60", 24" x 70", 24" x 84", 24" x 90", 24" x 96", 24" x 108", 24" x 116", 24" x 120"
Uses
- Wiring and hoses near the exhaust or headers
- Firewall, hood, floor pans and tunnels above the exhaust
- Diesel heater exhaust hoses, generators, RV and truck heat protection
How to install
- Clean the surface so it is free of dust, oil and wax.
- Cut to shape with sharp scissors or a utility knife.
- Self-adhesive: peel the liner slowly and press firmly, foil side facing the heat.
- Non-adhesive: secure with high-temperature foil tape or fasteners.
- Wear gloves and a dust mask when cutting ceramic fiber.
Returns
Unused, uncut product can be returned within 30 days of delivery.
